Installing new dictionary via smart card

gribblev · Messages: 1

I have borrowed my son's PW800 electronic dictionary to use at an overseas conference and have purchased a Korean/English/Korean smart card which I am assured is compatible with model. I cannot work out how to install the new dictionary. Can someone help me.

green · Messages: 390

Dear customer

1. Turn the Device on

2. Press the ON/OFF button and hold it, the screen should be ON

3. Press RESET button (pinhole) with paperclip for a second, while you
are holding the ON/OFF button, (the RESET button is on the left upper corner of keyboard panel)

4. The screen turns off and then on

5. Then screen shows: Main Menu,

Load Firmware,

Back Up Firmware

6. Press Load Firmware with stylus

7. You see the message on the screen: Select package

P 800 V and numbers

Cancel

8. In order to select the Package: Press P 800 V and numbers

9. The screen shows the message(window): Burn in Progress

10.Then another message appears: Info

Burn process complete

OK

11.Press OK

12.Then once again press the RESET button for a second without pressing ON/OFF button

green · Messages: 390

13.The screen turns off and on again

14.You see the Calibration Screen Message:

Hit the Target with the Stylus or press ENTER to skip calibration

15.Hit(press) the target (small square with cross) with stylus exactly in the center, which appears one by one in every corner of the screen going round clock and in the center of the screen

16.After completing the screen calibration the DEVICE is ready to work.

Customer Support

Ectaco Electronic Translators

www.ectaco.com